Casts of arms and legs: how to make them yourself? Three manufacturing options and decorating tips

• July 1, 2020
• Crafts
• Irina Kasabutskaya

Do you want to give a unique and original gift to yourself or your loved ones, but don’t know how? If you think that everything on store shelves is too banal and tasteless, then there is only one way out - to do something with your own hands. But here you are faced with a new task: what exactly to do? We have one option for you!

You can make your own crafts from plaster

It is not difficult, but exciting, you will gain new experience and surprise your loved ones.

You can make plaster figures with your own hands in various ways:

• Pour plaster into the prepared mold.
• Create a mold from an existing figurine and pour plaster into this mold.
• Apply plaster to the surface of objects, and then, after drying, carefully remove.
• Cover the object with plaster and leave it like that.
• Create molds from plaster with your own hands, for example, flower pots.

The last point mainly concerns organic objects, such as flowers or leaves, for example.

Methods for making a hand from plaster

There are two ways to make such an item:

1. An impression is made using a rubber glove filled with plaster.
2. A cast of your own hand.

For each of these methods, it is worth remembering the most important thing - if possible, avoid the formation of air bubbles when filling the mold with plaster, or reduce their presence to a minimum. The fewer bubbles there are, the less time you will need to sand the product and eliminate imperfections.

The photo below shows an example of bad work. Where air bubbles have formed, unsightly cavities remain that cannot be corrected by sanding.

Let's consider both methods of making a plaster hand with your own hands.

Master class No. 1. Plaster and rubber glove

You will need:

• gypsum;
• container in which the plaster will be mixed;
• water;
• thick rubber glove;
• a five-liter water bottle or any other stand on which you can attach the glove;
• tight hair tie;
• stationery knife;
• scissors;
• acrylic paints;
• napkins with beautiful designs;
• acrylic clear varnish.

Now let's get to work! Let's figure out how to make a hand from plaster using a rubber glove.

Preparation

Prepare the necessary material, accessories and tools in advance:

• Alginate mass for impressions;
• Gypsum;
• Stirrer (stirring stick), spoon and, if available, hand mixer;
• Water;
• Bucket or plastic container;
• Measuring cup, scales;
• Primer, protective varnish, sandpaper and acrylic paint for subsequent processing and finishing! (optional).

Prepare all the materials in advance because you will have very little time when you start mixing materials! The alginate mixture must be processed as soon as possible before setting time begins.

Manufacturing process step by step

• Step one. Prepare everything you need for work. Cut off the bottom of a five-liter bottle. Slide a rubber glove inside and secure it at the top of the neck with a hair tie. Make sure the glove is held securely.
• Step two. Pour plaster into a special bowl. Depending on the size of your glove, determine by eye how much plaster you need. Then add a little water and stir thoroughly. Ideally, the proportion of gypsum to water should be 6:4. After mixing, the gypsum should be similar in consistency to thick sour cream. You can stir the plaster with your hands, kneading it so that there are no lumps. Be sure to wear gloves before stirring, because the plaster hardens quickly and is very drying to the skin. Take care of your hands. You can use a whisk with a mixer or attach the whisk to a screwdriver. If you stir with your hands, remember: the plaster “lives” for ten minutes. So if you spend five minutes stirring it, you only have five minutes left to pour it into the mold.
• Step three. Pour plaster into the glove a little at a time. Check with your hand that the mixture is well distributed over the fingers of the glove. Take the bottle by the neck and shake it well, tapping it on the surface you are working on. Pour more plaster and shake, then add almost to the very top of the glove and shake again.
• Step four. Leave the plaster to dry. It usually takes 10-15 minutes for the plaster to harden, but it will still be better if you pour it in and leave it for a while while you go about your business.
• Step five. Remove the glove from the bottle, take the scissors and carefully cut it. But that is not all. Now the hand needs to be treated.
• Step six. Take a utility knife and carefully cut off the unsightly edges at the base of the plaster brush. You can also use a knife to scrape away any unevenness or roughness. You can use sandpaper instead of a knife. But be careful not to overdo it and grind your hand into dust. If you were unable to avoid air bubbles and there are still cavities on the plaster arm, you can try diluting a little more plaster and carefully covering up the imperfections.
• Step seven. Take acrylic paints. You can choose any color you like, but we still recommend taking white to start with. Cover the surface of the plaster hand with paint and wait for it to dry.
• Step eight. Take napkins with drawings and cut out the pictures you like with which you would like to decorate your plaster hand. Remove the white layer from them, there are usually two of them on napkins. Apply them to the plaster hand where you want, on the paint that is not yet completely dry, so that the picture sticks. Repeat as many times as you wish.
• Step nine. Cover your hand with clear acrylic varnish and leave to dry.
• Step ten. After completing all the previous nine steps, your product is ready.

Preparation of alginate mixture

Take a container and fill in the required volume of alginate. Then stir the mixture with a hand mixer (if you have one) and beat once with a beater.

Please note: small lumps in the wet mixture are not a problem.

Ratio:

• 20 ml water + 9 g alginate;
• 100 ml water + 45 g alginate;
• 1100 ml water + 500 g alginate.

Allow about 45 seconds for mixing and about 1 minute until you place the sample in the container.

The setting time of the alginate mass depends on the temperature of the water used . Warm water gives the alginate a shorter setting time.

Now immerse the sample in the alginate mixture without touching the edges of the container. When the mass becomes hard (rubber-like, elastic) and no longer sticky, carefully lift/pull the sample out of the frozen mass.

Master class No. 2. Your hands and plaster

To make a realistic plaster hand with your own hands, follow the steps from tutorial No. 2.

You will need:

• gypsum;
• alginate powder;
• container in which the plaster will be mixed;
• a container in which the alginate powder will be mixed;
• water;
• oil;
• stationery knife.

Let's look at the process of creating the plaster hand itself, without touching on the coloring process afterwards. You may not decorate such a hand with anything at all, leaving it looking like part of an ancient Greek sculpture. Or you can paint it in skin color to give the plaster hand maximum realism.

Why is this so popular?

Couples in love use 3D impressions of their intertwined hands to capture life's important moments. Often such compositions are timed to coincide with the day of engagement or wedding.

Young parents make impressions of their babies' hands to remember what they looked like as babies/children. Often such casts are elegantly decorated and given to relatives. And in some families there is even a tradition: on each baby’s birthday, another cast of his hands and feet is made. As a result, a whole collection of “sculptures” appears, clearly showing how the child grew from year to year.

Connoisseurs of non-standard solutions in the interior make casts of their own hands to make them part of the decor. Such an element of the composition can be used, for example, as an elegant solution for storing rings.

What is “alginate powder for impressions”

The use of this powder can most often be seen in dentistry. Using alginate, dentists make impressions to model dental prostheses, as well as to clarify the patient’s bite.

The powder sets quickly. Its “lifetime” is about fifteen minutes. So from the moment the water touches the powder, you don't have much time to stir it and then have time to stick your hand in there to create an impression.

Alginate holds its shape well, so it is often used for making impressions not only in dentistry. You can dip your hand into the alginate only after you have mixed the substance with water until it becomes thick sour cream. It will turn pink and change to yellow as it hardens.

Types and groups of materials

Modern dentistry uses various types of compositions for taking impressions. The doctor chooses the optimal ones, focusing on the tasks facing him and the clinical situation. The main requirements for materials from dentists:

• exact repetition of the structure of teeth and the contours of soft tissues in direct contact with the dentures;
• no deformation after extraction;
• low sensitivity to environmental conditions.

Impressions can be anatomical or functional

Elastic

Elastic materials tend to soften when heated and become elastic when cooled. They are combined into groups:

• Analginate containing stomalgin and novalgin. They depict the relief of the oral cavity well, but are subject to shrinkage, so they are not used for long-term storage: plaster models must be made immediately after taking the impression. Areas of application: complete removable structures, inlays, clasp dentures.
• Silicone ones are considered the best: they perfectly preserve the image of all areas of the teeth, including the gingival areas. Used for the manufacture of clasp models and ceramic crowns. The disadvantage is that shrinkage occurs approximately an hour after taking the impression, so the technician must have time to make a plaster model during this time.

Solid

Plaster of Paris is usually used to make hard impressions. It has the form of a powder diluted with water; Hardening time is 2-3 minutes. Advantages of the material:

• the relief of soft tissues is displayed with high accuracy;
• convenience during work;
• Dimensions are retained after storage.

Nowadays, plastic materials are used to make impressions; plaster is rarely used
. Nowadays, gypsum is rarely used, since the patient experiences discomfort when taking an impression, and it is also difficult to take an impression from areas of the teeth located close to the gums. Another disadvantage of gypsum is its uneven hardening: it crumbles when it dries, so it is often removed from the mouth in pieces.

Thermoplastic

From the name it is clear that under the influence of temperature such materials become soft, and when cooled they harden. The most common thermoplastic composition is gutta-percha. It can be introduced into the oral cavity repeatedly and is used for functional tests. Applicable in the following cases:

• for taking impressions with complete edentia;
• for the production of maxillofacial prints;
• for the production of pin teeth.

Disadvantages include possible deformations that occur when removing the mass from the oral cavity.

This is what taking impressions looks like

Modeling

Modeling materials are medical wax containing paraffin and stearin. They depict fabrics very accurately and are easy to use. The disadvantage is considered to be instability to temperature: when it increases, even slightly, they begin to melt.

How to make a realistic hand from plaster

Step one. Preparation of materials

The container in which you need to stir the alginate should be of such a size that your hand fits into it without touching the walls. This could be an unnecessary plastic bucket or an unnecessary water bottle with the top cut off.

Also prepare a container for plaster and the water with which you will dilute it in advance.

Step two. Preparation of alginate. Creating a mold for an impression

Pour 500 grams of alginate powder into the prepared container. The powder should be diluted with water in a 1:1 ratio. Pour in the water gradually, stirring the substance to prevent the formation of air bubbles.

When the alginate is ready, insert your hand into the substance in the position that you want to make the impression in the future.

And now all we have to do is wait. Sit still for 15 minutes, and after the time has elapsed, begin to slightly move the brush and gently pull it out of the container with the substance.

The mold for the impression is ready.

Step three. Working with plaster. Making a hand from plaster with your own hands

Thoroughly mix the plaster with water until it reaches the consistency of thick sour cream. Make sure it doesn't form lumps.

Pour some plaster into the impression mold.

Take the container with alginate in your hands and twist it so that the plaster is evenly distributed throughout the mold. This is necessary to ensure that there are no air bubbles in it, and therefore, there are no flaws in the product.

After this, fill the mold completely with plaster and leave it to harden for 10-30 minutes.

Step four. Removing the impression

When the product hardens, it is necessary to remove it. If you used a bucket, you can take a knife and carefully run it along the sides of the container. Then the frozen alginate will be easier to remove. Or, if you used a water bottle and don't mind ruining it, just cut it with scissors.

Hardened alginate breaks easily. Carefully separate the alginate from the plaster hand so as not to damage the product.

After this stage, your cast is ready.

How to prepare a baby model for “work”?

It is best to carry out work on making casts of arms and legs when the small model is calm. Pick a moment. This could be a dream or watching your favorite cartoons. You can find cartoons by following the link: "Cartoons for the little ones." There are sleepy children with whom you can do anything in this state. There is an interesting article about a child’s sleep: “Does your child sleep poorly? We are looking for possible causes and finding a solution to this problem.”

If you decide to carry out the work of making a cast while the child is awake, then be sure to make sure that the baby is in a good mood, he is not hungry and joyful. Does the baby move his fingers slightly during the impression? It doesn’t matter, it won’t spoil the final result, since the mass will better get into all the folds and the handle or leg will be more prominent. In this matter, the main thing is calmness; holding someone in a position will not give the desired result.

If the baby is still very small, then during the process, in order to calm him down, sing a lullaby. You can see options for lullabies in the article: “Lullabies for babies.”