Dental fillings: domestic materials conquer the market

Modern dentistry has a large arsenal of high-quality materials for filling teeth. What kind of filling should I put in order to reliably preserve the dental crown from destruction - plastic or ceramic, silicate or cement, chemical or light? Let's take a closer look at the different types of filling material and answer the question which filling is better.

Popular dental materials

Fillings are divided into permanent and temporary. A permanent one is placed when there is minor damage to the tooth crown, a temporary one is used for long-term complex treatment or diagnostics. A temporary filling is also used to protect medicinal compounds during dental treatment: a medicinal compound is placed under it.

The materials from which fillings are made are divided into several types:

  • cement, silicate;
  • plastic;
  • metal, amalgam;
  • ceramics;
  • composites.

Depending on the material used, fillings are divided into several main types:

  • cement;
  • composite;
  • compomers.

The dental industry also produces other types of fillings - plastic, metal and ceramic.

The most durable material is made from light-curing composite. Such fillings are expensive, but the high price justifies the long service life. The fillings look aesthetically pleasing and have the ability to change their shade with changes in lighting.

The most popular material is dental cement. These fillings are still in demand among patients due to their low cost, high adhesion and strength. The fillings literally stick to the surface of the crown and do not form air gaps.

Cement materials

Cement differs significantly from composite in its lower hardness, however, it is able to protect the tooth from repeated carious development. A disadvantage is the high density of cement compared to tooth tissue: over time, this contributes to the thinning of the crown surface adjacent to the filling.

Cement compositions have three subtypes, according to additives to the main ingredient:

  1. silicate;
  2. phosphate;
  3. glass ionomer.

Silicate compounds are the oldest of all. The material contains special glass mixed with phosphoric acids. The silicate composition has a different release of fluoride, which prevents the development of dental caries. The harmfulness of the material lies in its aggressive phosphoric acid, which destroys the pulp. To neutralize the effect of acid on the pulp tissue, a special gasket made of safe substances was installed.

Phosphate compounds are characterized by fragility and fragility, weak adhesion (adhesion to tooth tissue), and high abrasion. The peculiarity of these fillings is their high toxicity, which provokes the proliferation of aggressive bacteria. This substance (phosphate) does not protect well against the re-development of caries.

Glass ionomer cement is used to treat children. The substance is as close in texture as possible to dental tissue, has high adhesive characteristics and safety. The glass ionomer is illuminated with a special ultraviolet lamp, which promotes rapid hardening of the material and high-quality tooth protection from infection. The advantages of this material include the fluoride contained in the composition, which protects against the development of recurrent caries.

The disadvantages include fragility - softness and instability of the composition. In modern dentistry, strengthened glass ionomer is used, the composition of which is supplemented with metal or ceramic particles. This material is used for filling chewing molars; it is most resistant to abrasion. The last word in the development of dental materials is the production of nanoionomer, which reliably protects dental tissue from infection and the development of caries.

Proper care after installation

A large number of patients who have had light-curing fillings in the past think that they can immediately eat any food and there are no restrictions. In fact, a competent specialist will definitely warn you that it is better to wait at least 2 hours before starting a meal. But these are not all the rules that must be followed in order for the filling to retain its properties for as long as possible.

Basic recommendations

  • The existing restrictions should not scare you; it is important to comply with them only for the first time - at least for three days. Dentists' advice is as follows: Avoid any products containing dyes - both artificial and natural. This is in addition to the obvious, for example, sparkling waters, black tea, coffee, as well as juices (blueberry, cherry, pomegranate), beet dishes. Otherwise, you should expect some staining of the filling material, which will negatively affect the aesthetics of your smile;
  • Avoid starchy and sweet foods so as not to create favorable pathogenic microflora;
  • To further strengthen the filling, include more grains, vegetables and fruits in your diet.

And pay attention to the presence of pain in the area of ​​recent intervention. This is allowed for 2-3 days, as it can be caused by a traumatic injection with anesthesia; if the tooth continues to pull and ache, contact your doctor.

If you are confident in the specialist, but pain still occurs, perhaps this is an individual reaction. Alternatively, you may be given a special coating that will seal the dentinal tubules and solve the problem.

Composite compounds

Chemically cured composites were invented as an alternative to simple cement fillings. The composition of the composite includes porcelain, which gives greater strength to the cement. Also, according to their composition, composites are divided into three types:

  1. acrylic-containing;
  2. resin (epoxy);
  3. light-curing.

Of the listed compositions, the acrylic-containing composite has the greatest strength. These fillings are characterized by wear resistance, are little susceptible to abrasion, however, they have a toxic effect on the body. Due to toxicity, acrylic is contraindicated in many patients. Acrylic also often provokes the formation of pulpitis. Another negative feature of acrylic is its high absorbency, due to which the risk of caries increases significantly.

Resin composite material is not highly wear-resistant and durable, however, it is non-toxic and harmless to the body. The disadvantages of resin structures include a change in color after a few years: the fillings darken. Another feature of resin (epoxy) fillings is their excessive fragility: they can break off and be “eaten.” Therefore, it is better not to use epoxy composition on primary chewing molars. Epoxy composite also provokes the development of pulpitis, just like acrylic.

The light-curing composite gains its strength from a halogen lamp. They are also called photopolymer or solar-cured. The disadvantage of this material is the complexity of installation: polishing and grinding of the material is necessary. The filling must be polished every six months to maintain the original tone of the material.

What other disadvantages are typical for this material? These include the following properties of the filling:

  • shrinkage after curing;
  • possible chipping of the crown wall;
  • poor-quality hardening of the material.

The filling can shrink up to five percent of its original volume, which significantly reduces the effectiveness of protecting the tooth. Even with slight shrinkage of the filling, there is a high probability of chipping of the adjacent wall of the dental crown. Due to the technical difficulties of working with a halogen lamp, the hardening of the material may be incomplete - only 70%.

An innovation in modern dentistry is a nanocomposite, the structure of which consists of tiny particles. The nanocomposite is characterized by high adhesion to tooth tissues, providing reliable protection against infection and the spread of caries.

What is the difference between a light filling and a chemical filling?

The main difference between these two types of fillings is the curing method. A conventional (chemical) filling gains strength and is securely fixed in the installation area due to the chemical reaction that occurs between the components of the composite material. Photopolymer fillings become hard under the influence of ultraviolet radiation from a special lamp used by the dentist during tooth restoration.

Since the chemical reaction takes time to start and complete, conventional fillings harden more slowly compared to photopolymer restorations.

Plastic, metal and ceramic compounds

Plastic fillings are also at the peak of popularity, also due to their low price. Plastic has many disadvantages:

  • gives significant shrinkage after curing;
  • changes its color over time;
  • quickly wears out and becomes unusable;
  • poorly protects against secondary caries.

Important! Cement and plastic fillings are placed in free dental clinics.

Ceramic compositions

The distinctive characteristics of this material are high strength, lack of shrinkage and aesthetics. Ceramics does not darken during use and is not painted. In modern dentistry, ceramics is considered an almost ideal filling material. Types of ceramics include:

  1. transparent material;
  2. pressed material;
  3. metal ceramics.

The disadvantages include the difficulty of installation: the composition fills the hole in the tooth, like an inlay. The inlay is formed using an impression of a previously sanitized tooth.

Metal alloys

Amalgam material includes a mercury compound along with silver. The dangers of exposure to mercury in the body pose a certain health risk. The advantage of amalgam is its long service life and abrasion resistance.

Another disadvantage of this material is expansion during hardening. If the dentist does not correctly calculate the volume of the filling, the possibility of slight destruction of the crown cannot be ruled out.

Due to the unaesthetic appearance of metal structures, they are used on back teeth or the hidden surface of the crown.

What is the difference between a light filling and a chemical filling: the difference in price

Another difference between light fillings and chemical fillings is the price. Restorations made from photopolymers are more expensive because they have better aesthetics and a longer useful life. The type of filling should be chosen together with the treating dentist, so that only a specialist, having assessed the clinical situation, will be able to choose the optimal type of filling material for the patient.

You can receive high-quality dental treatment and restoration services by contacting our dentistry. We use modern filling materials and successfully restore patients’ teeth in the most difficult clinical cases!

Call us or 8 (926) 100-10-10

Which material to prefer

The dental compositions described above have their own characteristics, advantages and disadvantages. Which filling do you prefer? Which is better - light or chemical (ordinary)? The choice will depend on financial capabilities and the location of the tooth in the oral cavity - posterior molar or frontal.

It is preferable to place fillings made of durable, indelible compositions on posterior chewing molars. For example, metal, glass ionomer or nanocomposite materials.

If we consider from an aesthetic point of view, it is better to put light or ceramic fillings on the front teeth, which are identical to tooth enamel and are invisible when smiling. Light dental products are characterized by a certain fragility, and therefore cannot withstand heavy chewing load on the rear molars.

To restore a chipped or damaged tooth in the front rows, light fillings are used. Using a composite material, you can completely restore the shape of a tooth, which will look organic. A distinctive feature of the light composite is the versatility of choosing a color to match the tone of the natural enamel of the teeth.

If we consider the quality of the composition from the standpoint of durability, then the most durable materials are metal and photocomposite - a service life of more than ten years. All other trains last from four to five years.

Sources used:

  • Klyomin V. A., Borisenko A. V., Ishchenko P. V. Combined dental fillings. MIA, 2008
  • Practical therapeutic dentistry" (Nikolaev A.)
  • Scheller-Sheridan C (8 May 2013). Basic Guide to Dental Materials. John Wiley & Sons.
  • https://www.dentalhealth.ie/
Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]